• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Time for more POWAAA! (GEN V Build)

AmericanSoldier

New member
oh kids the time has come for some more ponies. ive been working hard/saving to get this pieced together and underway and the time is almost here! The plan is a gen v/n*/lq4 maf/3.5 sc pulley/modified l67 lim/ tune/nitto drag radials. shooting for 13.5 or better in the spring and i KNOW its gonna be easily attainable if i get the tune spot on.

what i have so far:

Gen V Supercharger
3.5 mps
s/c gasket
aluminum lim gasket
coolant elbows
injector o-rings
s/c oil

what i need:
longer s/c bolts
modified lim (which Bill is modifying for me as well as smoothing intake runners)
Northstar TB w/ lq4 (getting on black friday

The total build will be just under $1000 (before dyno tune)
tune and Nittos wil be after build is complete. looking at starting this RIGHT AFTER i get my n* soo after black friday. gonna hit it up in my bro in laws garage. prob gonna change fuel filter/plugs as well while im in there. Going to Performance Dyno in concord n.h for the tune. idk if ill use my 3/4 or 3.5 pulley..well see whats the better option. PICS TO UPLOAD IN A LITTLE BIT
 


ALSO id like to thank Bill for answering my many questions on this build and for hooking me up with a lim for it

and as always suggestions/input are welcome
 
BLOWN.jpg
 


nittos suck, i run a hoosier qtp


not ready for a full slick though, but i agree my dream setup would be skinnys in the rear and theres in front as well..on a draglite rim

im just looking for ATLEAST 1.9 60fts

trying to not break too much next season :th_laugh-lol2:
 
Nice! I have very similar mods to come this winter. I bought a 2001 GS a couple months ago along with a gen v , zzp ported lim, stage 2 ic, 1.9 rockers with ls6 springs, a rebuilt trans with 3.29 gears and all the goodies. I have a 3.25 and 3.0 pulley. I would like to hit something in the 12s next year along with Overkills tuning help. Total into this project will be less than $5000. Good luck with your build!
 
Nice! I have very similar mods to come this winter. I bought a 2001 GS a couple months ago along with a gen v , zzp ported lim, stage 2 ic, 1.9 rockers with ls6 springs, a rebuilt trans with 3.29 gears and all the goodies. I have a 3.25 and 3.0 pulley. I would like to hit something in the 12s next year along with Overkills tuning help. Total into this project will be less than $5000. Good luck with your build!

i dont see why you wouldnt get a 12.9 @105 out of that setup, unless Will was actually in your car tuning it, i wouldnt get a canned tune. that setup needs a legit tune..just my 2 cents ofcourse

and thanks, its gonna be fun! :th_thumbsup-wink:
 
Back
Top