• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

phil's build thread... back from the dead yet again

Re: phil is almost done... help with wiring and vacuum lines?

I'm just going to make my own extension lol I still got a ton of wire and I saved all the connectors off that harness I chopped up.
 


Re: phil is almost done... help with wiring and vacuum lines?

the connections are different, iirc the gt MAP is a 3 pin and the gtp is a 4 pin. i was thinking the same thing lol. i think i'm going junkyard hunting with a friend today, but i'm not counting on poling's to have anything
 
Re: phil is almost done... help with wiring and vacuum lines?

the MAP sensor and connector are one and the same, all you get are pins. you gotta splice a gtp connector onto the wiring, and i don't haz one. i do however have me headers, fedex dropped those off at about 9am. looks like i know what i'm doing today
 
Re: phil is almost done... help with wiring and vacuum lines?

Poil336 said:
the MAP sensor and connector are one and the same, all you get are pins. you gotta splice a gtp connector onto the wiring, and i don't haz one. i do however have me headers, fedex dropped those off at about 9am. looks like i know what i'm doing today
Click to expand...

I might have one of those connectors Let me check
 
Re: phil is almost done... help with wiring and vacuum lines?

I gotz one! it't the full length all the way back to the pcm with the pins all you got to do is plug it in.

IMAG0690.jpg


This is what you need right?
 


Re: phil is almost done... help with wiring and vacuum lines?

got the front and rear headers mounted today. they fit terribly. i had to file down some of the transmission bump to get the crossover pipe to sit right. worst part of the build. they look sexy though
Photo0652.jpg


and then my buddy murph and i swapped wheels for a quick pic. they were the ones i was looking at, Enkei EV-5's. he has 17's on his beretta though, i was going to get 18's and probably in gunmetal. looks tits
Photo0653.jpg
 
Re: phil is almost done... help with wiring and vacuum lines?

the bronze did look really sexy... i dont wanna have the same wheels as him though lol. i really like the enkei falcon. different, but close enough, and the same price
 


Re: phil is finishing up!

speed daddy knockoffs i believe. the collector is a seperate piece. cole, i was wrong, it's still a 3-pin. and i'm all about that harness, how much do you want for it? lol
 
Re: phil is finishing up!

Umm Idk lol ZZP sells a new one for $12.99 I believe because the ones from the factory get brittle and break. This ones in reasonable shape But I don't think it's quite worth $13 and since I will be needing one here in a month... I would need that out of it in order to buy the new one... Now If you went to the junckyard and just cut the connecter itself off with a few inchs of wire I'd be willing to just trade you for the connector and then I would make a harness.lol
 
Re: phil is finishing up!

poling's didn't have one, big surprise there lol. link for ZZP's?

edit: nevermind, i found it and bought one. this monster should be running by next weekend. with open headers, like a bauss. anybody know where i can get a new BBV?

another edit: nevermind, zzp wins again. it'll be like $50 to ship it though, so that's gonna have to wait till next paycheck. so, it'll be running about wo weeks from today
 
Last edited:
Re: phil is finishing up!

Poil336 said:
speed daddy knockoffs i believe. the collector is a seperate piece. cole, i was wrong, it's still a 3-pin. and i'm all about that harness, how much do you want for it? lol
Click to expand...

If the collector is a 3 bolt flange...then those are pacesetter knock-off's...no speed daddy presence there bruh...I think you bought the wrong ones.
 


Re: phil is finishing up!

damn. well then yeah, they definitely fit like ass. got them one though, kinda-ish. i'm thinkin about to telling an exhaust shop to run true duals off the headers to my dynomax mufflers, and ditch the y-pipe completely. thoughts?
 
Re: phil is finishing up!

The Pacesetter headers/knock-offs have a Y Collector...which could be hacked and ran into true duals I suppose...but keep in mind it sounds awful...Ron Vogel had true duals...look at his YT vid...its under GTP F-Body muffler or something like that.
 
You must log in or register to reply here.
Back
Top