• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

New 1 inch drive chain

I swear Ive seen larger than 1" chains being used on a monte forum before and for the life of me cant fine it again.

Turbo LS7 SS : ) - Page 2 - Monte Carlo Forum - Monte Carlo Enthusiast Forums

I think you're referring to this guy...

Dave, thanks for chiming in. Hopefully some more information can be shared to everyone soon. I"d like to know more, especially if it means that there might be a 7/16" pitch chain made available to have as a spare for my GMR 1".
 


I've had that one book marked but the one im talking about even showed a picture of the chain, the gears and said they were from volvo.
 


anyone have spec on the GMR chain?

Whatcha need?

If you search google: "4t65e cobalt gmr" you'll find a GM Tuner Source .pdf. Download it, you'll get the specs on the GM race trans, including information on the chain.

I have: CTP702 (1x7/16 Sprocket/Chain Set, (Ratio 2) 29 tooth drive, 31
tooth driven, 7/16 Chain, Drive Sprocket Support Assy.) 3.52 gear ratio. Whatever pictures you need let me know :)

Also, from what I've read the Volvo XC90 came with a 4t65e. A guy on 3800pro swapped diffs and threw it into his gtp. There may be a possibility that this could be the volvo trans people are referring to.
 
Last edited:


That link to 3800pro.com about the volvo diff isn't what I was talkign about Im talking about the volvo chain thats supposedly 1" or bigger. I still cant find pics of the chain and gears volvo uses.
 


The Volvo 4T65EV/GT transmission chain is the exact same dual chain setup that every other GM branded 4T65E uses. We have rebuilt lots of these transmissions from 99 S80s to 2005 XC90s, there is nothing special about their chain sets.
 
Back
Top