• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

So I'm at a standstill...

why do performance engines have to run on premium, why cant it run on regular and go fast? lame.........
 


they can, but that parts comes down to the tune. But you want to run higher grade gas to reduce kr/ping and have a lower flash point, and low/high compression comes into place aswell.
 
holy shiz only 16mpg? Does that sounds really low to anyone else? my v8 caddi ran with a misfire on 6 and still got 18?
 
our kia sorento takes $60 bucks and it lasts me like 5 days


taman86 said:
sh!t, here its 3.65 for permium, costs me 50 bucks to fill it up. my gf's car, scion xa, takes 30 bucks and can drive farther. i drive my car 10 min to and from work and thats it.
Click to expand...
 
For my information, why do you have to take the headers out to install the cam? i thought you only had to take the LIM off.
 


you have to take the lifters out, which requires removing the heads, which requires taking the headers off.
 
Poil336 said:
you have to take the lifters out, which requires removing the heads, which requires taking the headers off.
Click to expand...

since when do the heads need to be removed?

you need to remove the lim,to remove the lifters, and the valve covers to remove the rockers and push rods, and of course the front of the engine.
 


i shoulda known that one lol. for whatever reason it didn't occur to me that you could pull the rockers off to get the pushrods out. facepalm
 
You must log in or register to reply here.
Back
Top