• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Clear coat leaving white spots on tinted tailights what clear coat would u recomend?

MattTheBaker123

MattTheBaker123

New member
Alright so i was tinting my tailights today and got them to the point where i felt they were tinted enough. I go to spray them with this clear coat i got from walmart and when it dries they look all white and theres these ugly circles from the clear coat that dried on the lights. I got pissed off so i put another shade of tint on them and it seems fine now. Anybody know what kind of clear coat would work best to not leave those white spots and where i should buy it from?

Heres what i got so far i havent put the lights in the reverese light yet so thats why theyre hanging what do u think?:
0808091501b.jpg
 


It's fish eyes. It's from not cleaning the sufrace your painting well enough. I would just try cleaning it real good after you tint them and try again.
 
No but ive been scraping at the one tailight all day trying to get it off its pissing me off

whats the downside of not clear coating them besides them not being glossy?
 
Don't scrape it off. If anything sand it with like 1200 grit sand pper. Don't ruin your lights. You could even wet sand them. If your going to start all over wet sand the tails. Tint them. Let them dry over night. And then spray the clear on them in light coats.


A downside of them not being cleared is they will have less of a gloss and be less protected from scratches ect. But that's it.
 


wet sand with 1000 1500 and 2000 then acetone them down and repaint Im about 99% sure that will fix them. I did the same thing with my headlights but their pitted pretty bad and will be getting new ones because I wasnt happy how they looked. Headlights are a whole different issue though.
 
Before removing the tint, try wetsanding them really good and throw some more clear on there. Ill post pictures of the two sets I just did.
 
You must log in or register to reply here.
Back
Top