new list soon...what times

[BoostJunki3]

well ive picked my mods that will complete my build....

mods in sig plus...
2.8 MPS
1.95 YT RR/L76 Springs
WBS STG2 IC Kit
Fully Ported Gen3/LIM
LQ4 and LS1 orN* TB

think i can throw down some low 12's on slicks? say a 1.7 - 1.9 60ft?

 

[Iron Indian]

well ive picked my mods that will complete my build....

mods in sig plus...
2.8 MPS
1.95 YT RR/L76 Springs
WBS STG2 IC Kit
Fully Ported Gen3/LIM
LQ4 and LS1 orN* TB

think i can throw down some low 12's on slicks? say a 1.7 - 1.9 60ft?

May want to do some scanning before going with that pulley on that setup. I'm betting you'll be safer with the 3.0" on the street, 2.8" with Race Gas.

As for running low 12s with that setup, good luck. Not many have done it with rockers/IC/Headers, you'd be one of the few. High 12s probably......

 

[minichopper6hp]

Thats a lot of $$ but if you pm me im sure we can work something out. I have just acquired a new welder so im starting on the aluminum core design

 

[Bio248]

low 12s? no. 12s at all? sure. youre going to want to buy more than one pulley so you can play with your boost and timing.

 

[blueguy]

Your going to need injectors too with a pulley that small...those stockers will run static...you go lean with no fuel and then POP goes your pistons.

 

[blowfishRus6]

what about a built trany. stock one aint gonna like the slicks for long.


12's?? who knows, run it and tell us

 

[superv6]

I dunno but sounds pretty awesome anyway

 

[BoostJunki3]

Your going to need injectors too with a pulley that small...those stockers will run static...you go lean with no fuel and then POP goes your pistons.

yep forgot about that can i get 65 lb injectors just so if i ever decide to run e85 i already have big enough injectors?