• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

how much to expect....

BoostJunki3 said:
im fine with that man do you have all the tools/pullers and shyt im completely fine with doing all the work with your aid and you'd make some money off it :)
Click to expand...

i have all the tools to do it as i have done it on my car more than once before i settled on a rocker setup. the hardest part is dropping the cradle ever so slightly so you can get the cam in.
 


minichopper6hp said:
Depends. Im more then likely going to design a completely different core as phenolic is proving to be too hard to seal for the average person, i honestly dont see how they are having problems but that is beside the point. Im going to be switching to aluminum and the parts would be even cheaper the design i have in mind (about $50 in materials). Ill keep you posted but that deal would still stand.
Click to expand...

Even better...keep me posted.
 
minichopper6hp said:
Depends. Im more then likely going to design a completely different core as phenolic is proving to be too hard to seal for the average person, i honestly dont see how they are having problems but that is beside the point. Im going to be switching to aluminum and the parts would be even cheaper the design i have in mind (about $50 in materials). Ill keep you posted but that deal would still stand.
Click to expand...
do one for the l32 too :)
 
Bio248 said:
i have all the tools to do it as i have done it on my car more than once before i settled on a rocker setup. the hardest part is dropping the cradle ever so slightly so you can get the cam in.
Click to expand...

ok well ill be in touch if i ever pony up and commit lol
 
You must log in or register to reply here.
Back
Top