I searched the forum but couldn't find and answer for this.
I Just replaced both mufflers on my 2000 GTP. The car was purchased a year ago with 67K miles and it now has approx 88K miles. No mods have been done to the car. These were the original mufflers. I had to cut the Y-pipe just before the weld joint and use 2" connectors and pipe clamps because no welder was available.
After everything was put back together the exhaust tips are out of alignment. The elevation seems to be OK but they are coming out at an angle (kind of like pigeon toed).
Is there an adjustment to get these squared up?
Tom C
I Just replaced both mufflers on my 2000 GTP. The car was purchased a year ago with 67K miles and it now has approx 88K miles. No mods have been done to the car. These were the original mufflers. I had to cut the Y-pipe just before the weld joint and use 2" connectors and pipe clamps because no welder was available.
After everything was put back together the exhaust tips are out of alignment. The elevation seems to be OK but they are coming out at an angle (kind of like pigeon toed).
Is there an adjustment to get these squared up?
Tom C
