• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

W-Body Custom Exhaust Build

Scottydoggs said:
ok, you need that bracket. junk yard part. its 2 bolts on the inside of the bumper. take the bolts too.

the Y pipe hanger on the driver side, you may not need anything to hold it up. or you can have a shop weld in a hanger bar to the car bottom near the hook on the pipe. then put the hanger on it.
Click to expand...

I am doing it all myself me and my buddy are doing the welding. Good thing there is no jy around here that's close I could rip parts off
 


you'll need that bracket, or try to copy the one you have, being you guys are welding should be easy enough to fab up. some flat stock and tube steel. all at the depot.
 
Try a JY. There may not be one close but call the closest ones and see if they'll get that bracket for you

Sent from my SCH-S720C using Tapatalk 2
 




that's different size piping than the dynomax kit and the kit uses super turbos and NOT the vt's. wife's full dynomax kit sounded louder. maybe she'll be on to confirm
 


if you are looking for something LOUD trust me magnaflow is the way to go but you'll need a decently big resonator to reduce/eliminate drone. I might put my magnaflow back on just for the meet lol
 
You must log in or register to reply here.
Back
Top