• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

P1350 Code

TimMcCallum

TimMcCallum

Banned
Im getting a p1350 code. Its for my icm/pcm I just took off the ground on the icm bracket and it is still making my rpms stutter. I have been looking and I dont know what else to check.
 


- Faulty Ignition Control Module
- Ignition Control Module harness is open or shorted
- Ignition Control Module circuit poor electrical connection


Those are the causes.​
 


arunany6.jpg

Does this look stock? Its got 2 wires that go into 1 wire than into the icm connector
 
Fivefingerdeathpunch said:
Start tracing wires and checking fuses.
Click to expand...

I took off the whole icm engine mount bracket and ripped the wire loom and tape off the wires and it seemed that they looked all fine. And I messed with them alittle and put it all back together and now it doesnt seem to be doing it. I might drive the car to work tomorrow to see if it still does it.
 


Right..it had only been posted in yesterday. I should lock this one too... Just because I don't feel it's going anywhere either.
 
Honestly dude. I work 7-7 everyday and from 8-12 im building a shed and fence so I cant exactly be looking up stuff to fix my car. Sad thing is, I need to drive to work everyday. It sucks dude
 
TimMcCallum said:
Honestly dude. I work 7-7 everyday and from 8-12 im building a shed and fence so I cant exactly be looking up stuff to fix my car. Sad thing is, I need to drive to work everyday. It sucks dude
Click to expand...

Just when I thought I heard it all.....



It's not our responsibility to fix your sh*t. Sure we can help and guide you in the right direction... But when your not making the effort...... Just take it to a mechanic then and pay the price. Sell your 4,0000 hp Camaro if needed.
 
Honestly Dudette.... I'm at work by 6am and it's a longer drive as they moved us to another site while renovating the building, so add an extra tank of gas each week. When I'm out, I have two houses to maintain yards at, while helping my aging parents, plus two dogs etc etc etc.. and I can go on with projects and things that have to be done for years. Let's add in that I recently moved 20 ton of rock for the shed site.. since you likely don't know what a ton is..that equates to 40,000lbs of rock that I shoveled and moved, next up is modifying the fence, also I learned about inground sprinkler systems too. If you'd like to compare.. please bring it on. Ohhhhh and I try and help people with their cars when I can. Speaking of.. I made time before a party for a fellow forumer that needed a trans swap on Saturday.

When I have a problem.. I take the time to at least google the code or learn what might be causing it. What you call searching is a poor excuse for being lazy.
 


I imagine you have a cell phone with crap loads of data that you can use. Google it on a break and go from there. Don't complain about lack of time to us. I wok 40+ hours a week, 2 kids under the age of 5 and a full time student. I go to work, then school, then home, homework then bed. I still find time to get the car done amongst other home projects. You need to manage your time more wisely.........in other words, quit being a sissy and get it done.


Remember this, name changes come easy when you upset the wrong people..........
 
I work 46 hours a week minimum. I am a student. I have after work jobs that I have to do till 11-12 at night. So I really have no time. At the moment I am in the bathroom at work. So yea.
 
It seems like it doesnt do it anymore. Im thinking either the ground or a wire is messed up somewhere. I put it all back together last night an made some test runs and it seems better.
Ill know later on
 
You must log in or register to reply here.
Back
Top