• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Post Whoring Thread 2.0- DON'T DELETE THIS ONE

Status
Not open for further replies.


Blah. It's hot. It's busy. Damn torch didn't remove my strut bolt and to top it off? 36,000 passengers are coming through here tonight Smh.

Sent from my HTC One using Tapatalk
 
I just pound them out, your probably gonna have to pop the ball joint and remove the whole thing then work at it. You you tried pushing down on the LCA to take some tension off the bolt?

Sent from the Milky Way
 


Bluemagic said:
Blah. It's hot. It's busy. Damn torch didn't remove my strut bolt and to top it off?
Click to expand...
Yeah I had to remove mine as an assembly, put a brick next to it to help transfer more of the shock to the bolt, and wale on it for like 2 minutes with a small handled sledge hammer. I wire brushed it real good and anti-seized it on the reinstall.
BillBoost37 said:
D The kiddies are going to think the wrong things when you post stuff like this.
Click to expand...
mmm nope just you lol

Today at work I got the 3800 all put back together, new timing cover and water pump gasket. Then when attmpting to fill the system using this neat tool we have, it wouldn't hold. So I put it on the pressure tester, the rad hose was leaking on the water pump outlet on the timing cover... The clamp must have been weak so I used a regular hose clamp.
Then it had a really slow leak, so I pressure tested it again but couldn't find it. So I filled the system with just water then pressurized it, the fitting in the alternator bracket was leaking (the steel adapter that the heater hose connects to) So a new o-ring went on there.

After all that we do a compression test (which I suggested on day 1, within the first 10 minutes of hearing it run) and it has low compression on multiple cylinders, cyl 6 and 4 were worst. So we're doing a motor swap on the GP. What a waste of time. At least I learned a lot about working on 3800's.

Also, I got my rear sway bar bushings. They were advertised as standard bushings, I thought well new rubber bushings is better than old ones. Well actually they are not at all like pictured They're like moogs, even have the number tag in the bag like moog's do. They're hard as a rock though.

DSC06015Custom.jpg
 
Last edited:
Lets catch a raccoon who has been tipping over the trash! Already killed one, we think there are a few.
amyjepur.jpg

hy7u4y7y.jpg


Sent from the Milky Way
 
Russosaur said:
I just pound them out, your probably gonna have to pop the ball joint and remove the whole thing then work at it. You you tried pushing down on the LCA to take some tension off the bolt?

Sent from the Milky Way
Click to expand...

Haven't tried that method but will be tomorrow

Sent from my HTC One using Tapatalk
 


Aw I know, just wondered if he got lost because the Regal site is over there >>>>>>

Hot Rod magazine called the 69 Grand Prix and I quote "A face only a mother could love". As with people, "good looking" is subjective.
 
that regal site is pretty good for how to's, but other wise its dead as can be. very slow. its funny tho, you see the same issues over there as you do here.

lots of noobs too, the dumb questions are never ending over there. research guys, damn lol
 
I like youe GP, then again I seem like a few who like turd gens and foxbodys. Nobody in my family likes them.

Sent from the Milky Way
 


Thx, Kyle.

I was pointing at an imaginary site lol. This un says GP at the top of the page! But yeah, they are so often confused with GAs because both are cheap junk. I have one friend who just can't seem to pronounce Grand Prix, always calls them GAs. What'cha gonna do?
 
Or calls them Grand Prix and not Grand Preee, yet this GP site has an ugly G6 at the top of it. Never was a GA fan, too small of a car for me.

Sent from the Milky Way
 
Ya know Matt... these 97-08 GP's need so much help, I never have a chance to go to the Regal site..lol

Maybe we don't get to see enough of a real GP .....
 
You mean the kind thats so slow moss can grow on the north side? Ha. When they stuck the extra doors on, "real" ended! Prix means race, don't it? A synonym for Regal is "Queenly".

IMG_5063.jpg


Just good natured GP banter here, I had a cool (real) Buford once too. As far as I'm concerned all 3800 cars are Buick powered. Its a shame Pontiac wasn't favored by the Chinese too, or they might still be around making G-whizzes. I will never stop poking fun at sedans though, so get used to that!
 
Status
Not open for further replies.
Back
Top