• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

E cig, cause cigarettes are for losers



If you like the peach ring candies i suggest dime piece from mr eliquid. Mild peach flavor lot's of vapor. Flavor's come down to just trying a bunch and decide what you like. I have tried many other flavors but dime piece is my go to adv.

Sent from my XT1080 using Tapatalk
 
there is a place that sells the liquids in my mall I'm gonna be heading there. And ordering stuff to build my own coils soon because I think this stock kanger on is burning and I just got it today
 
When you fill it and are first using that coil, let it wick up and soak in some juice. Turn the voltage down. Depending on which coil you have in your tank you may be cranked too high. On 1.8 coils( usual stock coil in kanger) I run them at around 3.5-7v on my 2.2 coils I am running 4.2v. I have burned off at the least 3 boxes worth of coil's in the process and learned it was me overheating and drying the wick out, and burning them up.

Sent from my XT1080 using Tapatalk
 
I was liking wear it was hitting messed with it found a better sweet spot and I prime it now like hit it without turning it on after my hits and it's ok now
 
I had to step out, I was taking care of our Deployed GXP owner Dirt Dog.

He is going to get into mech mods aka Cloud Chasing. I advised him on a list of good items a while back, he has a fellow Marine that's into mech mods on the ship. So at least he can chill after duty and vape clouds with a buddy. It's funny, during my second deployment in Iraq(07-09), after patrols we would sit around with 4 or 5 hookas going. Now they got these Vape thingys, crazy huh!!

He paypal'd me some change, I took the list, went to ebay and got everything on the list with $3 to spare from what he gave me.

Now for the wait, then after it gets to me. I'm going to drill out his atomizer and do a build, so that when he receives the gear, all he will have to do is juice it up and vape.

It's going to be a few weeks, so hopefully everything goes smoothly.

I don't mind taking care of and helping people, just have to be patient and let me know what your needs are. Good thing to do is watch youtube and read up on http://www.e-cigarette-forum.com/forum/ so you have so ideas and makes it easier for me to look it up.

His mech mod is shipping strait to the ship thankfully, cause he ordered a real nice one called the ARmod, look it up, it's kick ass.
 


osiris94ej said:
If you like the peach ring candies i suggest dime piece from mr eliquid. Mild peach flavor lot's of vapor. Flavor's come down to just trying a bunch and decide what you like. I have tried many other flavors but dime piece is my go to adv.

Sent from my XT1080 using Tapatalk
Click to expand...

Thats what im using! Really good
 
hey hey hey guess who. lol i got night shift duty tonight and webs free at nights but blocked during the day.

Anyways really looking forward to the stuff texastanker is helping me with and my ARmod shipped today so ill probably get it around the same time texas gets my stuff in the mail to come to me. can't wait
 
So far I have the Charger and large bore drip tip. Once the other stuff gets to me, I will ship it all to Dirt Dog so he can enjoy some clouds.
 
What a nice guy

This dripper crap kinda pisses me off! Its taking me some time to get this tasting right thing down. I get this odd taste with the juice.
1.8 ohm micro right now. In this pic I had a cotton wick going through the coil. But 10min ago I took it out and just packed the cotton under and around it to see if that helps. I have "brain matter" juice in @4.1volts, seems ok for right now.

igolme by smetters20, on Flickr


e cig forum one guy does his like this. coil right by the air hole, I think I will try that next, very simple, limited cotton which I prefer. I do wish these were deeper though less dripping needed:)

Img_4138_zpsc44a8312 by smetters20, on Flickr
 
Tanker what would you charge me to set up my Protank 3 for some clouds but with a smooth hit. Or can it even be done with that tank? I'll be using the Steam Stm-1 VV/VW mod.

Sent from Not so smart smartphone
 


Twizted 1 said:
Tanker what would you charge me to set up my Protank 3 for some clouds but with a smooth hit. Or can it even be done with that tank? I'll be using the Steam Stm-1 VV/VW mod.

Sent from Not so smart smartphone
Click to expand...

ITHURTZ, did you line up the air hole with the coil? Also getting the wick setup right is a trial and error thing. To little and it burns, to much and it floods.

Twizted 1, I'm still perfecting my Protank 3 builds, the last one I built came out to 1.1Ω and would only fire on a few VV/VW devices. Once I get it down good, then I will let you know.
 
Si texas its always lined up. I forgot I had 2 igo-l's and made this one just like the picture with the coil right by the hole and used just a wick nothing else. This one is 2.1ohms so far so good, just juice taste

igol2 by smetters20, on Flickr
 
TexasTanker19kilo20 said:
ITHURTZ, did you line up the air hole with the coil? Also getting the wick setup right is a trial and error thing. To little and it burns, to much and it floods.

Twizted 1, I'm still perfecting my Protank 3 builds, the last one I built came out to 1.1Ω and would only fire on a few VV/VW devices. Once I get it down good, then I will let you know.
Click to expand...

Ok, thanks man.

Sent from Not so smart smartphone
 


I've been using the Phantom. It's okay.. It barely serves it's purpose. The batteries are complete garbage, I'm on my 5th one that won't keep a charge, the heating element burns out pretty quick, I go through 5 in two weeks. They developed a new burning chamber where it won't leak and I'll get "maximum" flavor but so far I'm not really impressed by the cheaply made parts they throw into their product. What's a good site to deal with to custom build?
 
ebay!
terry says man up
provari
smoktech
sigelei
tesla
vamo
innokin
mvp
evic


thats all I can think of right now


side note I think I turned my brother into the bright side. I let him have my emax to try it out. Well he ordered a sigelei zmax and a few pro tanks and is now waiting mail! Excellent
 
You must log in or register to reply here.
Back
Top