• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

INFORMATION What's the next step after Meguiar's M105 and M205

B

Bandit1228

New member
I'm getting close to making some time to polish up my car. I've got a Porter Cable 7424 along with Meguiar's M105 and M205 polishes. I've seen in several different right ups that after using these, you should just get a good wax and apply that but then I've also seen people mention applying a sealer, glaze, wax, etc... I've never done this before but I would like to do this the right way. Does any one have suggestions or tips on exactly which product would be good to use?

Thanks
 


I stuck with Meg's.

You can either try Yellow #26 (which I've had GREAT luck with)...

Or, whatever sealer wax you prefer...honestly. I always did the high speed with the cutter and used a orbital lower speed for the finish.

Always seemed to be easier that way and never used to give that "haze" you'd get sometimes.

This car was done back when I still just had a random low speed orbital, with a swirl remover and the yellow #26 glaze. Ryan's car always looked awesome clean.

http://www.grandprixforums.net/showthread.php?t=18803
 
You must log in or register to reply here.
Back
Top