What is this and can I relocate it?

[MyPrixGT06]

I just put an intake on my 2006 GT and found this in my airflow box.

It looks like it needs to stay dry due to its location. Is there a way i can relocate it to be able to remove the rest of the filter box and where is a good location? And what is it for?

Sorry about the poor quality picture.

 

[2003 SSEi]

That is your PCM, yes you can move it, and NO it doesnot need to be in a dry area. They are sealed from any moisture

 

[Bio248]

if its the PCM you can just let it sit there where the stock air box was.

 

[tayl5645]

if you want to get rid of the ugly sight from where the airbox is too but want to keep the tray just cut the top part of the box off. I did it and it works nicely keeps the PCM in place

 

[MyPrixGT06]

I decided to take out the box and zip tie it so it won't move. I also but the soft side of velcrow to the underside of the PCM so if it does move it won't scretch anything up.

 

[Bio248]

take the ribbed tubing off and replace it with a smooth AT LEAST 3" piece of pipe, 4" would be ideal. that is the restrictive part of the intake, not the air box.

 

[blueguy]

Or just bolt the MAF to the TB...and then the cone to the end of the MAF...but I'd do what that guy^^ said.

 

[MyPrixGT06]

this was stage 1. First warm day since I got this car that I could play with it. I was planning on making a CAI and use pvc to run it to the fender. So I can go from TB and use a rubber fitting to connect the MAF and then pipe to cone?