• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Wanting to know how to program for transmission ratio, injectors, and turbo

G

GTPMidknight

New member
I'm really interested in learning how to program for bigger injectors, table for a turbo, and also how to calculate the drive ratio change in the trans.
Thanks for any information, Not looking for easy outs but wanting to understand how to do it myself. Thanks for any help.
 


you need a tuner first, before you have that in hand theres nothing you can do. with the tuner its all pretty easy to change stuff.
 
there is a how to guide on changing the gear ratio with hp tuners in this section in the stickies. you can also find a how to on adjusting for bigger injectors in a different sticky in this section. not sure about the turbo tuning.
 
For the fuel injectors should I just calculate a %ge and change the table in the tuner. Or will that not work. I got 80 lb injectors not sure how much of that 80 lbs im going to need.
 


scan tools, scan car, then pick what you want to scan, when done scanning you open up logs drop down. you can view, or export, pick exports, save as a csv file iirc.

logs are saved with the time and date for you too. they start to list 1, 2, 3, and so on, highest # is the last scan.

when you export your stock maf file, highlight the maf file, then right click and export, save as a csv file. you save every thing as a csv.
 
You must log in or register to reply here.
Back
Top