• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Want to lower your car? Look in here!!

has anyone tired out the new style wbs springs with only a 1" rear drop i was going to use them with agx struts

or intesnse coil over kit
 
Last edited:




if necessary you can slot the upper mounting bolt hole on the lower strut mounts. that way you can adjust the hub for camber when doing an alignment. it's really the best way to solve it instead of using camber bolts.
 
hi guys i have question i have 07 gp and want to buy lowering springs can i use coils form 03+ gp or impala 03+?
 
If I went with Moog Police/Taxi quickstrut (I assume it's FE4 or is 9C1 package different) would I get any height change? O don't want anything too stiff, just something better than my FE2 with hopefully better gasing. Part #ST8558
 


What year? I believe the FE3 and FE4 raise '03 down cars noticeably. If you have an 04+ I don't see the ears for the sway (could just be a stock photo), so your suspension has to be set up for that.
 
Ok guys, I am newer to this forum, but not the car scene. This is my second GXP and I am replacing struts/springs. I would like to go with a 1.5” drop but I can find a spring anywhere. I’ve been searching Canuck and eibach but no success. Is there something I’m missing? It’s an 06 GXP BTW.

TIA,

Chris
 
They claim 1.8/1.6 for the 97-03, and I ended up with 1.1875/.625 when I used their springs.

They claim 2.5/2.0 for the GXP and 1.7/1.7 for non GXP. Why not go with the non GXP springs?
 
You must log in or register to reply here.
Back
Top