VS Cam..Pushrods/Lifters?

[Blake71091]

When doing my VS cam build should I do lifters and pushrods as well?

Ported L67 heads
L32 LIM port matched
90lb LS springs
LS retainers

Thanks

 

[REDCRAPGP]

Sure wouldn't hurt but unless you have the extra money to spare you can just reuse the ones you have in the car now unless there's a issue with them

 

[machinegunsquid]

There's no need to, but if you want everything to be new, go right on ahead. Make sure to soak the lifters.

 

[Nchristopherson]

I just did a VS cam swap on my car and reused the lifters and pushrods. Just be sure to keep them organized so they go in the same bore/on the same seat. I used 12 shelf units, 1 for each lifter/pushrod/rocker

 

[sseilmnop]

I used new on my VS cam originally but when timing chain broke there was an issue with one lifter / pushrod, it was worn funny. I put the stock parts back in, save your money.