• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Various gaskets in felpro lim kit

FriboRage

FriboRage

New member
Putting my motor back together and I found two different sets of gaskets, I assume they’re to fit various motors?


Mostly the end seals:


Gaskets - Album on Imgur

Sorry I couldn’t get them to embed properly on my phone.

Im pretty sure I just need the dark blue ones, what are the light blue ones?

also, it says 6 fuel rail o rings, which I guess go on the injectors to go into the heads, but then theres 6 more fatter o rings that it just labels them as o rings but not what for...
 


One set is for a block with dowel holes and the other is for the other style block. If you have dowel holes, obviously, you know which set you run.

There's upper and lower injector o-rings. If you didn't pull them from the rail, then don't worry about the uppers.
 
Thanks, that’s kind of what I suspected, but I don’t wanna put this together twice so I thought I’d make sure.

Im glad I finally did this, though, the cars at 150k and the gasket was definitely failed for awhile, I can see the places on the old gasket where the coolant passages were broken and collapsed. So much mess to clean up on the block, outside the lim, on the valve covers and the gasket surfaces.
 
You must log in or register to reply here.
Back
Top