tuning for supercharger pulley

[pureevilz28]

my cousin is wanting to put a pulley on his 01 gtp. has all the support mods. i dont know alot about forced induction, he wants me to tune it with hp tuners. ive done some basic tuning thats it.
i know im supposed to look for knock retard when i scan it. youre supposed to change the high octane timing table to get rid of the knock retard, correct? if so how do i use the scan data to know how much to change the timing? is there anything else i need to tune?

 

[OH4CompG]

Set the timing for 18 degrees advance at WOT and do fuel tuning from there to get rid of kr.

 

[TurboKent]

Read through this click here

Should give you an idea on how to tune, the guide isn't setup for a v6 so some things will be different.

 

[TheOtherNick]

Set the timing for 18 degrees advance at WOT and do fuel tuning from there to get rid of kr.

I would not do that. Scan him first to see what his tune looks like? Do you have a wide band?

 

[Bio248]

Set the timing for 18 degrees advance at WOT and do fuel tuning from there to get rid of kr.

hahahah. no. thats asking for a ton of knock.