• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Top Swapped L26 hpt file



Yeah it would have made sense to include all if that info haha.

Blended inlet Gen V
1.8 roller rockers
42.5 injectors
Heads ported just enough to smooth out casting flaws.
Cold air fenderwell intake

Sent from my SPH-D710 using Tapatalk 2
 


2007

I was using the MAF table from and 05 GTP and I fixed my injector tables last night.

Above 7000hz on MAF frequency I lock in Power Enrichment. Did 10.0:1 to be safe. Writing with 11.0:1 right now.
 
ha4yhu4y.jpg
 


PE entry should be about 25% throttle. Other than that make your commanded PE vs coolant about 12.5, it should command about 11.5 on the scan at that point assuming the rest is stock.
 
That doesn't seem too lean? I'm commanding 10 now and seeing 13.2 on the wideband and some knock. I had PE at 30% too. May try 25. After tonight I'm giving it a break. Commanding so rich is really sucking down the tank.
 
jlgp2007nc said:
That doesn't seem too lean? I'm commanding 10 now and seeing 13.2 on the wideband and some knock. I had PE at 30% too. May try 25. After tonight I'm giving it a break. Commanding so rich is really sucking down the tank.
Click to expand...

Its not going to make a noticeable mpg difference...
 
I know, but I still have to give it a break for now. Still knocking all over the place. Using AL 104 plugs. Maybe I'll go to 103s this weekend.

Sent from my SPH-D710 using Tapatalk 2
 


jlgp2007nc said:
I know, but I still have to give it a break for now. Still knocking all over the place. Using AL 104 plugs. Maybe I'll go to 103s this weekend.

Sent from my SPH-D710 using Tapatalk 2
Click to expand...

You put L67 timing in correct? Start out with about 14 degrees or so if you are having issues.
 
No I put in L32. Used file from an 05 GTP. VE table scaled for L67 MAP sensor that im using.

Do you have HPT? I think I can upload a scan file here right?
 
You must log in or register to reply here.
Back
Top