• Failure to follow these rules may result in your threads being locked, deleted, or moved. Depending on the severity of your actions, or frequency of your actions, your user account could be suspended or banned. These rules are to help protect both buyer and seller.


    1. CONSOLIDATE all of your for sale items into ONE thread only. This means there will be NO making multiple sales threads for different items regardless if the parts are related or not.

    2. PRICE IS REQUIRED. We do not permit ads without an asking price for each item. "Best Offer" is not an allowable substitute for posting a price. You may ask for $1 but a price must be listed regardless. If a price is not listed with in the first 24 hours of making your sale thread IT WILL BE LOCKED or DELETED. Once a price is listed a bidding war is not permitted. If the seller gets an offer that meets his asking price, the seller should honor the asking price and sell for that amount.

    3. EBAY LINKS AND OTHER LINKS. We allow links to ebay ads, but you MUST have a buy-it-now price posted, or an asking price to stop the auction in your ad here (Not just in the link). If it is from another site or from here, do not use a link but post the full text instead with pictures if you have them listed. If a BIN price is not posted, then your thread will be DELETED.

    4. CITY / STATE are required info for each ad. Information must be posted in the first post of thread, NO EXCEPTIONS. Buyers and sellers reserve the rights to privately ask for full contact information on any purchase or sale. 24 hour notice will be given, if you do not comply your post will be DELETED.

    5. NO TWO PARTY SALES. This means no more "I'm selling for a friend" posts and will be deleted immediately with no notice. Seller assumes all responsibility of anything they post for sale.

    6. NO FEELER THREADS. You are either selling it or you aren’t selling it.

    7. POST COUNT AND/OR TIME LIMIT. We are requesting that you spend some time with us before you start a For Sale thread. A pre-determined minimum number of posts will be required or 1 year since creating the account + an intro thread (just so we know you aren’t the Prince of Africa). Any for sale thread posted out of the For Sale section to circumvent the rules will result in being deleted. Those who do meet the criteria and post outside the section will have their thread moved, constant violation of this will result in an infraction.

    8. NO BUMPING OR TT’ing YOUR THREAD MORE THAN ONCE IN 48 HOURS. Don’t worry your thread will still be a bold read until a user reads it and if people are really interested they will let you know. Post warning will be issued if in violation and on the 3rd warning, the thread will just be locked.

    9. NO THREAD DUMPING OR I DON’T LIKE YOUR PRICE. Don’t post in a person’s thread just to tell them they are too high, either move along and say nothing or throw an offer to them. The person can sell it at whatever price they think someone is willing to pay. Offenders will be issued a warning, if it is a constant issue then an infraction will be issued.

    10. KEEP YOUR THREAD UP TO DATE. This is really for your benefit, so you don’t get 10 PMs asking if you still have it when you already sold it.

    11. NO WEAPONS. As Admins we have determined that no weapons will be allowed to be sold, this includes knives, guns and anything else deemed a weapon (even if its a wall hanger only). We ask that if you want to sell these items you seek out the appropriate websites elsewhere to do so.

    12. Pictures are REQUIRED. Pictures of all items for sale. This is to help BOTH seller and buyer. As a seller it is MUCH easier to sell something if you have pictures of it. As a buyer you feel better seeing exactly what you are buying. Pictures should contain the item/s for sale and a sign of some kind that has your username on it. 24 hour notice will be given, if you do not comply your post will be DELETED.

    FRAUD & RISK. Buy and Sell at your own risk. Grand Prix Forums and its staff are not responsible if someone rips you off or doesn't send parts out in a timely manner. This classifieds section is a free service for the community, and it is YOUR responsibility to handle all transactions in a low-risk method. DO NOT contact us if there is a dispute between you and someone else, we are NOT INVOLVED. You can help minimize fraud risk by doing these suggestions:

    Pay using PAYPAL, using a credit card. This way, if a part does not arrive, you can do a charge back through your credit card company. If you gift it, then you have no recourse to get your money back when things fall through. Pay the 3% and have the buyer protection. Using someone else's paypal and gifting to pay for goods is violating Paypal's Terms of Service.



    Always ask for full name, residential address, phone numbers of both buyers and sellers. An honest seller should have no problem disclosing this info to you privately.


    Shipping things C.O.D. is risky. Try to use UPS or Fedex, so that you can track shipments. Have someone sign for it if it is expensive.


    Ask for references from other members, hopefully from other members who have been registered for longer than one year and are active here.


    Use your gut feeling. If something seems too good to be true, or a seller/buyer seems a little shady, don't take the risk.

    TIPS:
    -Post pictures: with mobile phones these days and auto uploads, it’s not even really hard anymore. Have it automatically drop in Photobucket, grab the Img tag link and paste it in.

    -Give good contact information if you aren’t going to be on here a lot.

    -If you are going to disappear for an extended time (vacation, time in jail, what have you), then give us a quick note that you aren’t going to be around. People will trust you a little more.

    -Look around and gauge your price with other items. Just cause you bought it for $1000, doesn’t mean it’s now worth $1,200 or even the original $1,000. You are free to ask what ever you want, but an item that is priced right will sell quicker.
  • The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

TDCRacing FWI

  • Thread starter Thread starter TDCRacing
  • Start date Start date
T

TDCRacing

Guest
0a60283b.jpg




Instock shipping out in 2-3 days after payment is made!!!



First things first. When you come out with a product it has to be a better design...and not be over priced or at a price no one can afford. Period.




I'm introducing a new product very similar to the JMB fenderwell intake.




Lets be blunt and list the flaws of this design-


1.Fender/bumper bulges out because of position of the air filter. Basicly the air filter is to long....but is actually very small measuring in at around 5 inches long. To get to the point it's a bad spot for an air filter.Also very hard to acess the filter for service.

2.The length of the pipe after the bend that the coupler goes on (TB Side) is too short. Therefore making it a bad angle to atach the intake to the TB with a coupler.

3. Fender hole cover- The hole that is in the plate that covers the hole in the fender is about 5 inches. The pipe is 4 inches. This causes a very irratating rattle while driving.



The TDCRacing intake fixes all of these mentioned problems above.



Fixed problem 1 by creating a 90* turndown therefore making the air filter VERY easy to change and bulging fender/bumper is gone.There is no straw sucking effect with the added length of pipe because of the size of the pipe to begin with.

Fixed problem 2 by adding more length of pipe onto that side AFTER the bend.

Fixed problem 3 by making the hole in the cover the same size as the pipe.

Very simple



Another thing is is that aftermarket intakes for our cars are way over priced. This is also a thing in the past with this intake.Also I provide options to you. For example if you just bought a 50 dollar k&n filter you can get my intake without a filter making it even cheaper.Plus you have 3 different filters to choose from. One for every budget.



Price list and options.


Intake- Includes the FWI,your choice of clamps and a silicone coupleralong with the cover plate -115.00+shipping





Intake kit- Includes the FWI,your choice of clamps and a silicone coupler w/ filter and cover plate-


145.00+shipping with reuseable cotton gauze type cone filter.
165.00+shipping with k&n cone filter.



* You choose from t-bolt style clamps or worm gear type clamps.All are stainless steel.You may combine them or mismatch them with your order. Although I recomend the worm type at the filter.No extra costs.


*ALL FWI's include a lifetime waranty that does not include the filter. Covers the intake itself.Not paint or powder coating and all couplers and clamps. You get a new part for free and shipping to you is also free.


*FWI's will be primed then painted free of charge any normal regular color you choose or can be left unpainted. Powder coating is 20 bucks extra.


*Depending on location shipping is usually around 10-15 bucks



Best of all all prices are without your 10% off being a GPF Member.

LQ4 guys I have you covered!!-Email me

[email protected] is the paypal address and customer service email. So ANY questions feel free to contact me anytime. Would you regular talk to me on the phone? no problem shoot me an email with your number and i'll give you a call asap.

There is a 20% restock fee for any cancled orders/Returned orders.This is to help recoupe some of the gas money and the time I took from my work day to build you one of these.The intake that i just made you may never get sold. Not doing it to make money or to try to rip people off just so that I won't go broke and can continue making these.This will not apply to damaged items that happened in shipping.



Here is an example of what your filter looks like after 6 months of use with the JMB intake.

199796a1.jpg



And a comparison shot with the JMB.

cbb86dac.jpg
 
Last edited:


Also. I don't need anyone telling me it's a bad design. It's not. If you want somethng changed for you let me know and I will be more than happy to do anything that will help you.
 


nice idea. good execution. im not too sure i would want or need this. i like short ram intakes more due to the better flow, im not concerned about the absolute coolest air from outside.
 
Well, Shat! If I hadn't just spent 85+ on my own custom setup, I'd go for this for sure!

It looks very nice, Parker!
 
Thanks Dan. Hope you got everything running good on your end.
 


Will you accept JMB's on trade-in? LOL!

Looks excellent. I do have a question though. I have been thinking of upgrading my ported L67 TB to an LS1 or N*. Can there be any provisions made for this swap? My JMB basicaly makes this impossible because of where the first bend is in it.

Nice work TDC!
 
Abrasive said:
Will you accept JMB's on trade-in? LOL!

Looks excellent. I do have a question though. I have been thinking of upgrading my ported L67 TB to an LS1 or N*. Can there be any provisions made for this swap? My JMB basicaly makes this impossible because of where the first bend is in it.

Nice work TDC!
Click to expand...

LOL....Your a funny guy Jay....I can't wait to get the pos off my car lol....



What kind of provisions need to be made. I wasent aware of anything different on those except the Stand alone MAF. I have the LQ4 setup along with the ZZP 78 MM TB. If you are talking about the Stand alone MAF then yes I already have everything worked out. There will be an increase in price because of the 2 additional couplers and 2 additional clamps for the MAF
 
TDCRacing said:
LOL....Your a funny guy Jay....I can't wait to get the pos off my car lol....



What kind of provisions need to be made. I wasent aware of anything different on those except the Stand alone MAF. I have the LQ4 setup along with the ZZP 78 MM TB. If you are talking about the Stand alone MAF then yes I already have everything worked out. There will be an increase in price because of the 2 additional couplers and 2 additional clamps for the MAF
Click to expand...


That's what I needed to know. The stand alone MAF is my problem. If I had the setup on my car, it would hit the JMB in the first bend and I was concerned about getting it to fit right if I had to cut it down. Of course, I could have always just made a new FWI, but I loved the looks of the JMB so much it has delayed my switch to a different TB setup. Thanks for the info.
 
No problem if theres abything i can do for you just let me know
 


Scotty at the moment no i dont. This is why i wanted to wait till everything was together lol...but i got ahead of myself.


The next day or so i will be taking a compleate picture of the system off the car with clamps couplers ect. I am also going to do a picture of it on the car installed with everything in place.
 
Ahhh, cool, that I understand. You know us, we're like kids in the worlds largest Toys R Us store, we gotta see it now and have it now, LOL

PM me or something when you get some pics up of that, Im interested in seeing that. I'll try and keep an eye on the thread though too.
 
LOL,No problem i'll be sure to send you a pm. You and everyone else will have some pics by friday for sure.
 
You must log in or register to reply here.
Back
Top