• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Starting engine on engine stand?

bbptech

bbptech

New member
Saw this guys video of him starting his 3.1L V6 Mclaren Turbo on his engine stand.

What im wondering is what equipment is he using to do this? How do u turn the car off? Just running a hose to a tank of gas? Please enlighten me on how this can be done and how to do it.
 


im not sure why youd want to do this, but the guys that usually do it end up using a stand alone fuel management system.
 
i'v built 460 big blocks and made a stand out of 4 by 4, its not hard. just make a panel to hold gauges and extra radiator for cooling. you can break it in and also check and repair any leaks easier plus make your final valve adj easier. with new cam etc you should run at least 1500 to 2000 for 15 min and seat your lifters to cam.( now computer systems i;v never done them.) then when install can get on.
 
roller cam does not require that same break in.

you can run it for a few mins with out coolent. but if your doing it to check for leaks on gaskets and what not, you better have some coolent lines hooked up because it could take some time for these leaks to become apparent.
 
i wouldnt run 1 min without the coolant hooked up. extra rad for hookup means what it says, hoses thermo and all and a bff.
 


You must log in or register to reply here.
Back
Top