• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

SSC lowering springs

Yes I got a set of anti-pogo washers. I didnt find it very hard to install the springs. an easier way? Replace your struts while you're at it, that way you just put the springs on new struts instead of removing your old springs and putting on the new ones.
 


Currently running SSC and Monroe struts...


Previously had Eibach's andd KYB Struts

They both ride stiff, I'm thinking of going back to stock.... The potholes F*($# you up sometimes.... :th_tongue2:

it handles amazing tho!... so its a trade off... and it looks pretty good.
 
Thanks for the info! but i have one more ? did you replace the cambers on your car to fit new lowering springs!!??
 
With my eibachs and kyb's i had to get camber bolts...

OR...


you can drill out (enlarge) the top hole on the bottom of the strut to adjust the camber that way without needing the bolts...


currently with the SSCs I have not seen any camber issues, although I was told my isolator pad / strut mound was incorrectly installed previously which caused the camber issues
 
You must log in or register to reply here.
Back
Top