• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Squeaking right front..

G

grazin

New member
Hey guys, I have a 2003 gtp with almost 123,000 miles on the clock..

I'm getting a squeaking noise from the right front end. It gets worse when I hit the breaks and turn right.it still continues through the turn with my foot off the breaks..

I replaced the struts ,front and rear,with Monroe quick struts including new strut mounts..

So I'm going to replace the control arms and stabilizer bar..

Parts I'm looking at..

Moog lca's
Doorman f&r bars..

Any input would be greatly appreciated.

Thx

Sent from my SM-G900V using Tapatalk
 


When's the last time you did your rotors and pads? That's the first thing I would've checked for a squeak. The Moog lcas are good and so is the Dorman front bar. There are better rear bars like the Addco but it might take you a while to get it.
 
I have about 2 years on the f body brakes.. I'm leaning towards the end links.. it really only does it when suspension loads.. it's driving me crazy..

Sent from my SM-G900V using Tapatalk
 
Ok, so I'm doing to do some suspension work to get rid of this annoying squeaking right front, and I might as well address the rear as well... I'm looking into the following parts ,mind you my car isn't lowered ,nor do I need it to run on a rail.. with that said, I'm looking into the following parts..

Moog front r series lower control arms..

Doorman front stabilizer bar with bushings and end links..

Addoco rear stabilizer bar with links. The Addoco bar was a bit pricey and I'm not tracking the car so might settle for Dorman rear ..

Rear trailing arms.. I believe they call them rear control arms on summit.. (not sure though. )

And rear lateral armss.

I've already done the quick struts all the way around with new strut mounts..

Does this sound like a descent setup?

As always, thx

Sent from my SM-G900V using Tapatalk
 
I could let you know in a few weeks. I just bought the following suspension mods but won't have the chance to install them for the next two weeks: BMR trailing arms and front and rear control arms,Addco rear sway bar, moog rear sway links, progress front sway. Had a line on zzp strut bars, but that seems to have fallen through. Will have a set by the time I install everything though.
 
You must log in or register to reply here.
Back
Top