Springs and rockers same between L36/L67?

[twiztid]

I am going to top swap my L36 soon, and I am wondering if the valve springs and rockers are the same on the L36 and L67. I ask bc my L36 only has 50k on it, while the L67 parts are high miles.

 

[JoRoW99]

Yes they will work, i transferred everything over from my L36 heads. While youre there you should get new valve seals and a valve job.

 

[twiztid]

Thanks. I am going to get the heads checked for cracks first. Next priority will def be the new seals and a valve job (a VJ).

 

[Rico]

If you're top swapping to eliminate some KR put a cam and some #105's.

 

[twiztid]

I know what I am doing there. I am installing a VS csm during.the top swap, and will swap springs later.

Sent from my YP-G70 using Tapatalk 2

 

[Fivefingerdeathpunch]

You need atleast L76 (G8) springs to run the VS cam.

 

[matt5112]

You need atleast L76 (G8) springs to run the VS cam.

Unless your springs have less than 80k miles on em.

 

[JoRoW99]

or if you baby it i suppose

 

[Rico]

Unless your springs have less than 80k miles on em.

Cutting it close with those and the VS. I would play it safe and make sure you don't float.

 

[twiztid]

Unless your springs have less than 80k miles on em.

My springs only have 50k on them. I just want this top swapped sooner than later. Springs aren't difficult to swap.

 

[twiztid]

Is the
MAF sensor the same between the 2 as well? I just got sn L67 throttle body with no MAF in it.

Sent from my Galaxy using Tapatalk 2

 

[bmx6454]

yes. if it fits, its the same.