So my EGR is deleted

[KeithGTP03]

I swear I find more and more about my car everyday thanks to this site. I checked my DTC's on my aeroforce today, the SES light isnt on but I wanted to see if anything would come up. P0403 and P0405 came up. So I went to inspect my EGR. Low and behold it is not there and I see a blocking plate on my rear exhaust mani. So, I know the PCM was set to not report, otherwise I would not have passed previous inspections. But Im wondering why my aeroforce would show it and should I just clear those codes?

 

[Explicit_Spade]

So the codes are only on the aeroforce? If they have been deleted on your PCM they shouldn't report to your Aerofoce either...

 

[KeithGTP03]

I know its weird. But I should not have been able to pass inspection if those codes are present. I have passed the last 3 years, and the egr has been gonzo the whole time

 

[Pure2sin]

Maybe its just reading the code history and not the current DTCs.

 

[KeithGTP03]

Nah...theyre current. I erased em but they came back. I just remembered that one of the inspectors told me that I can have one system fail the emissions and still pass. So that must be how its been passing inspections. Weird that they're not tripping my SES.

 

[FoSHO99]

The faults may be enabled but the fault type might be set to no reporting, you can change the fault type to No report or as I copied/pasted below. There are 2 separate tables in powrtuner. Fault enable and fault type. Below is the fault type table.

0 = 1 trip SES on, 3 trips SES Off. 1 = 2 trips SES On, 3 trips SES off. 2 = Service On. 3 = No Reporting.

 

[KeithGTP03]

sweet thanks Fosh....Im gonna buy a tuner and change em to no report. It's bugging me now that I know they're there.
Edit: So if I disable reporting, will it disable all reporting or just the parameters I select?

 

[Bio248]

just the ones you select.