• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Rotors Seized on Used m90

hdnseek

hdnseek

New member
Yesterday I went down and picked up a m90, tb, and lim for a trade on some old rims. Got it home and noticed the pulley won't turn, took the nose off and the nose spin freely but the rotors are jammed, pulled the rotors out of the housing and tried to get then to turn but no luck, can this be fixed or do I have to get all new internals for the charger or can the rotors be seperated from the gears, etc. Any help would be appreciated

Sent from my HTC One mini using Tapatalk
 


Not sure if it can be fixed or not but you can probably get a set of used rotors if it came down to that
 
If the bearings on the rotor plate are seized, it's a huge pain and usually not worthwhile. I have seen one guy pull them apart...I don't remember if he got it back togehter. Timing/alignment was a big thing.
 
So what are my chances of finding just the rotor housing with rotors for sale

Sent from my HTC One mini using Tapatalk
 




BillBoost37 said:
If the bearings on the rotor plate are seized, it's a huge pain and usually not worthwhile. I have seen one guy pull them apart...I don't remember if he got it back togehter. Timing/alignment was a big thing.
Click to expand...

The Aussie did.

Timing wasn't the big issue.

The issue is you have to damage the centre plate to get the bearings out.

At that point, you might as well have a new centre piece machined so you can change the bearings.
 
You must log in or register to reply here.
Back
Top