push button ideas

[BoostJunki3]

so i have this theory.....my alarm has a starter kill relay so that takes care of the security part so i was thinking of taking a toggle switch and hooking it up to the ign wire and accessory wire via a 12v relay so i could power the ign and accessory with no key, then putting a push button on the starter wire before the alarm so when the cars locked the push button wont work....and i will never need a key again.....

ps. pk3 is already removed on my car....

think it would work? and wouldnt i have to remove the column lock? how would i do that?

 

[I800C0LLECT]

I've heard of people doing something similar by relocating the ignition with the key already in it. I like it!! Please don't use generic radio shack buttons Use something cool!


Push Button Switches

 

[stlmo_gtp]

so i have this theory.....my alarm has a starter kill relay so that takes care of the security part so i was thinking of taking a toggle switch and hooking it up to the ign wire and accessory wire via a 12v relay so i could power the ign and accessory with no key, then putting a push button on the starter wire before the alarm so when the cars locked the push button wont work....and i will never need a key again.....

ps. pk3 is already removed on my car....

think it would work? and wouldnt i have to remove the column lock? how would i do that?

i have been thinking about doing this for awhile just never got to it, you will have to remove the wheel lock yes, i think to remove it you have to pull off the steering wheel and it should be attached to the back of the steering wheel, or the front of the column? ..that i how it was in a civic i owned not to sure how the set up is on a gp but i wouldn't think it would be much different