• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

pulling trans out of 01 grand prix gt

adamtrippin said:
anyone know how many bolts hold the trans in on each side....
Click to expand...

Trans bell housing to engine should have 1 bolt on the passenger side (accessable once you take off the engine to trans support bracket which connects to the trans diff area. The drivers side trans bolts should have 2 studs and 3 bolts. There should be a total of 6 pieces of hardware holding the trans bellhousing to engine and 4 bolts attaching the trans diff bracket to the engine.

 


oh great i only got the 2 bolts and one stud on the driver side, and i think i got the right bolt on the passenger side.... the one that goes towards the front of the car??(think its the right one)..... so i gotta find 1 more stud and 1 more bolt.... and where is this "trans diff bracket to the engine" is that between the engine and trans on the oil pan? or is it next to it??? soo confused lol... but i just wanna get this done...
 
the engine to diff bracket goes in behind where the oil pressure sensor goes if you look throught the pas side wheel well with a flashlight and you can see the oil pres sensor behind it you will see to bolt holes on the trans facing you and the other 2 bolt holes are on the engine side facing backwards

I actually had to take my oil pre sensor out to get to the engine side easier
 
You must log in or register to reply here.
Back
Top