problem with amp

[Tha Ghost]

So I have this 300 Watt Kicker amp ZX300.1, powering 2 12" quantum cozmic series, it wuz working perfectly fine, but today it stopped working by itself, it turns on, but it has protect on, when I disconnected the white RCA wire, the protection turns off, & when I plug it back in protect turns on again, does any1 know wut might b wrong with my amp?

 

[jteske88]

Check your RCA to see if it could be grounding out somewhere possibly

 

[Tha Ghost]

Wut do u mean, like check if its cut somewhere?

 

[I800C0LLECT]

Pop the case. Sounds like something on your input might be fried.

 

[jteske88]

Well yeah you say it protects when u plug it in so I would possibly change RCA to see if that's the cause or I might check all connections

 

[Tha Ghost]

Yeah I have the top off, I dont c anything wrong with it. I haven't checked all the wiring but ima do dat. Thanxs guys for da advice. Ima get back 2 as soon as I c wuts wrong with it.

 

[I800C0LLECT]

Sometimes you don't notice it until you see the solder joint on the back side.