• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Plog

JCG's-GTP

JCG's-GTP

New member
Gonna be installing a Plog this week and was just curious, the dip stick look like it needs to be moved to install it. I havent looked a whole lot into it yet. Any suggestions?
 


Some people have installed the plog without removing the dipstick. I don't know why you wouldn't, takes all of 30 seconds and putting it back is it pretty easy. Just use a flashlight if you need to see the hole better when you reinstall the dipstick tube.
 
Pretty much, there is a bolt that holds it on one of the exhaust manifold studs, but you take that off and it will just pull out. A little twist and pull at the same time and it should come out.
 
Make sure you check the condition of the o-ring after you remove the dipstick. The key to reistalling is watching where it comes out. The first time I didn't pay attention and it took me a bit to spot the hole when reinstalling.

fwiw I've installed a plog on two different cars and can't imagine doing it without remoing the dipstick.
 


You must log in or register to reply here.
Back
Top