• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Open cone air intake



ysujyzum.jpg



That's mine... I run it year round in Michigan
 
Alright thanks and I noticed you don't have the top cover on is that just for the pic? Mine didn't come with the cover so I didn't know if I need to buy one. Btw I'm talking about the factory plastic that says 3800 series 2
 




thats the ait sensor that is in the stock air tube, i drilled a hole and glued it in the hole.

ice put his inside the filter i bet.
 
Probaly I haven't really looked at mine yet to get any ideas actually only started thinking about this an hour ago
 
I did have it tucked into the air filter for a while. But I was advised not to do that so now it chills tucked between the throttle cables.
 


Ok... On a side note why is inside a no no.... I know its unrelated but in my MiniSprint which is Yamaha r1 powered I tucked it in the filter figuring it would get the true flow would it not be the same?
 
Having it directly on the throttle body will skew maf readings.

Same with sticking it inside the air filter, it'll just get moved round in there and maybe sucked up against the maf screen.

Get a coupler before the filter, you do want some straight flowing tubing before the screen.
 
You must log in or register to reply here.
Back
Top