Oil feed line

[Wsmccoy]

So I damaged my oil feed line for my turbo and have been searching for something to work, I was wondering if a braided brake line would withstand the heat of the oil and being by the turbo and manifold. If so I was looking at something like this http://www.summitracing.com/parts/aaf-all46402-42

 

[MoarkatsINmuhtrailer]

Look online. That is for brakes.

While the pressure rating is good, the heat may not be.

Actually look for oil feed lines.

 

[Wsmccoy]

I tried looking for oil feed lines and all of them that i have found are either to short, come in a kit for $100 or I have to buy the line and fittings separate. I contacted ZZP about buying just the feed line instead of the kit and I'm waiting to hear back from them

 

[MoarkatsINmuhtrailer]

Just gonna leave this here.....

http://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=ATP-OIL-015&Category_Code=ATP-OIL1

Good website, have everything you'll need

 

[Wsmccoy]

Ok thanks. I just got a message back from ZZP too. So I'll figure out what'll be better to get