• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

New with parts for sale

J

johnykville69

New member
Hi all my name is John and I live in Iowa, just builking my second 3800, going with a way different set up, so have a whole slug of parts not using on the new engine. All parts have maybe 2000 miles on them or less..I have everything for an zzp IC set up heat exchanger, pump, prety much all but the IC think may have some damage but know can get new cores if is damaged. Also zzp ported TB, adaptor plate, Modified Intake to go with the IC set up for a gen 5 blower, also have a gen 5 blower but may need a little work done on it not sure yet. have 42# injectors, front power log, zzp hot cam and also 1.9 rockers that i used before I got the cam for a while, have zzp tuned pcm to go with the set up, have stock 3800 rockers or about any engine part off my last extra motor so if not mentioned anything to many to list so feel free to ask if I have it, will take about any reasonable offers, Just got another motor pre built, so also have a gtp tranny that hooks to performance shift on a gtp. Also have a 4000 stall convertor for tranny and a stock stall convertor, many other parts so if looking for something just ask here or text me after noon at 515 313 3135 central time as work in afternoon thu evening so not up in the ams. thanks hope to meet some other 3800 buffs.
 


welcome!

youre going to need to move all that stuff you got for sale to the 'Parts for sale' section.

also youre going to need prices and most likely pictures for all that stuff.



just a friendly heads up.
 
For one, welcome.

The intro section is not a sales section, but with being a new member you don't know the ropes yet. Which is very understandable, new members arent allowed into the sale section until a certain amount of time has passed or you reach a certain number of posts.

Once you reach that mark you can post whatever you have for sale in the sales section. You will need pictures and prices on each item per the rules. There is a small thread in that section that has the rules and such.
 


Ok cool, No Rush any way, have read post on here for a couple years, but just never joined in, Just got on so will go back thru the rules and time limits, thanks alot for the heads up. Any cool mods on your gtp? I am finding at a certain level it becomes like rocket science with the tuning and air an fueling, just replace my motor and had to redo exhuast connections, now code blippingp1133. turned off twice but came back again, thinking could be a fabrication leaking on exhaust, but new motor dooes have headers so checking into that some time soon. Have the gt motor with higher compression, top swap with gen 5 blower, working on getting my interceptor scan gauage to work, almost had it programmed and batterry went dead, and now can not get to bring up the program page or anything but a blank screen. So if any one has any ideas on those areas I am all ears. Again thanks guys for the guidance on here, hate being a newbee. Lol
 
Not sure how to PM on here yet, maybe can fill me in, I am little older and not the best on computers, but have came a long way in last few years. lol I am open for an offer I guess, My boy has a gtp as well but not much money for parts yet, anything left over he may get for free. Olo.
 
johnykville69 said:
Ok cool, No Rush any way, have read post on here for a couple years, but just never joined in, Just got on so will go back thru the rules and time limits, thanks alot for the heads up. Any cool mods on your gtp? I am finding at a certain level it becomes like rocket science with the tuning and air an fueling, just replace my motor and had to redo exhuast connections, now code blippingp1133. turned off twice but came back again, thinking could be a fabrication leaking on exhaust, but new motor dooes have headers so checking into that some time soon. Have the gt motor with higher compression, top swap with gen 5 blower, working on getting my interceptor scan gauage to work, almost had it programmed and batterry went dead, and now can not get to bring up the program page or anything but a blank screen. So if any one has any ideas on those areas I am all ears. Again thanks guys for the guidance on here, hate being a newbee. Lol
Click to expand...

What are you tuning with?

HP Tuners or DHP, though it doesnt really matter, just wondering.

Year of car, motor, trans?

Code P1133 is somewhat common with headers, over time mine just stopped showing up. I guess the car didnt care anymore.

The aeroforce scangauge might need a 12v power source to stay on.
 


Yeah has seperate `12v power wire for aeroforce guage, just think the logic got interupted during set up when battery died, had just got car done and had been sitting to long, but wanted to get gauge in to monitor my parameters, ugh, something so simple just never is.. Lol
 
I just drove in a buddies 6.3 litre special eddition 300m last night then got into the gtp with 3 guys each time, think were all suprised felt more kick, and of course harder shifts with the tranny shift Kit from Intense, and my car not even tuned in yet and barely got on it..Lol
 
Yeah because pontiac. but got that on the first try, lots of directions for progamming but initial set up was going pretty easy till battery died, what luck, now powers up with a blank screen, think ask a guy wha has installed several if ever had this issue. You use a aerforce inteceptor? just wonderin what all parameters be th best to measure, and if know if need two analog input wires to anything? lol
 


You must log in or register to reply here.
Back
Top