Need keyless entry board pics

[THansenite]

My girlfriend has a 2005 Grand Prix and its keyless entry was acting up and not wanting open. I opened up the keyfob and noticed the battery holder had come up off the board somewhat. I didn't have my small soldering gun around, so I used one that ended up being too big for the job. I ended up bridging a solder point or accidentally removing solder where there should have been some.

I really want to get this fixed for her so she can use the keyless entry again. Could someone please post up some pics of the front and back of the circuit board in the keyfob so that I can see where the problem is? Thanks!

 

[katesgrandprix]

Why dont you just order a new one, they are not that much money. I would check over at programyourremote to see if you could program it yourself. I know that part breaking is a very very common problem. Looks like you could order a new one over at Pontiac parts for about 50 bucks.

 

[gtpinsc]

put a ad in the want to buy section of the forum i bet u can get one for around 20 bucks from a member here.