• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

my 4th brake light and 3rd reverse light

H

HART

New member
well im doing led conversion so far i have brake lights, all the 194's except tag plate light which is on its way, my reverse lights and front signals are on there way. on to the pics.

15344_323240870421_509790421_9516173_7055102_n.jpg


i know its kinda pointless but meh it was cheap
15344_323240855421_509790421_9516172_5095739_n.jpg


theres a 63 led bulb in here and its bright even during the day
15344_323240840421_509790421_9516169_4097500_n.jpg
 


i completely understand, i like the fact that when its off you dont notice the strips till they turn on.
 
Looks good!

I love LEDs too! I got them in the interior of my Vette, they are socketed and easy to replace. Full LED brake and tail lamps too.

I got them in my house and flashlights. And I have loads of them in my pinball machines!

If you are looking for a good 194, or lamp that uses this size base, go to cointaker.com. This is a pinball LED site BUT a 906 bulb is 12 volts, and can be used anywhere a 194 or 906, or similar base is used. These lamps have 5 bright LEDs and are priced at $2.49 a bulb.

I bought one at a pinball show recently and got it plugged into my license plate lamp on my GP. Thinking about doing the other 194 lamps outside and inside, as well as the 168 lamps.

Cheaper way then going to superbright LEDs, or elsewhere.


Where did you get your brake and tail LED bulbs?

Do you have an issue with hyperflashing?
 
Last edited:
i know i might get beaten for this but i have been ebay shopping and i bought the relay from autolumination.com but the bulbs are ebay, the little white strip under my plate was $2.05 shipped to my door.
 


You must log in or register to reply here.
Back
Top