• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

More ignorant brake questions from an ignorant person

DirtDog

DirtDog

New member
So I redid all of my front brakes three months ago. Full set up. New calipers, new ceramic pads from oreillys. Ever since then I get a squeak when I push on the brakes. I have been researching the brake sections and read thru the big bad brake forum. I lobed everything up very well with synthetic brake stuff in the packets. Any more ideas for the squeak? And the dust guard is not rubbing the rotor. First thing I checked. Also the squeak is worst in morning when dew is on them

Sent from my pager using Morse code. ... .. ... ....
 


Is it cause their ceramic? The old ones which were the original factory didn't squeak but the left nasty brake dust on everything. And yes it pretty much is for the first few times I push brakes. Where all are the proper places to put the synthetic lube stuff?

Sent from my pager using Morse code. ... .. ... ....
 
Maybe its the material, I'm not an expert on it.

I'm sure the weather, being damp, type of pad and rotor come into play, but I wouldnt even worry about it.

And when I do brake jobs, I only grease the caliper bolts/pins and the slides that the pads run on. I never grease the back of the pads.
 
Will do. I guess that squeak is something to live with then.

Sent from my pager using Morse code. ... .. ... ....
 
Try different pads, I used to have the golds from advance auto and they made horrible noise. Went back, got the $12 silver line pads, no more noise.
 


Its all good now...old thread sorta. Ended up having the brand new rotors resurfaced to remove that first super thin layer and that fixed the noise

Sent from my DROID RAZR using Tapatalk 2
 
Did you remember to clean the rotors with brake clean before you put them on and I would take the pads off clean them and relube them again
 
Yea I did...dunno if this other guy did. Its probably just cause their new rotors like mine were

Sent from my DROID RAZR using Tapatalk 2
 
You must log in or register to reply here.
Back
Top