• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Moog Poly End Links w/ GMPP Swaybar?



Thanks a lot for the quick responses guys!

@h0wl0ngcanitbe- Did you notice a difference between the stock and moog end links? That is, if you installed the moog end links after you installed the sway bar with the GMPP end links...
 
I did a semi big suspension job so yes I did notice a difference but thats cause I did this...

ZZP Trailing arms
Strut/spring combo from ZZP
GMPP front and rear sways, and Moog bushings

So it made quite the difference, but from what I hear the Moog endlinks are considerably better then the stock ones but I couldnt tell ya with any certainty. What I will say is they do work together well.
 
I just changed mine to moogs with the gmpp bar. FYI they are way cheaper on rockauto than zzp.
 


Thanks for the heads up about rock auto Guz

Anyone have any suggestions on the rear links?
Will probably end up going with Moog part# K6662 they are $15.58 a side from rock auto
 
Anyone happen to have any recommendations for poly front and rear sway bar bushings?
Have seen energy suspension bushings but wasn't sure on what bushings would work with the gmpp bars..
Any links or info would be great, I know the front GMPP bar is 34mm while the rear is 19mm.
 
I just replaced my front GMPP bushings with moogs. They are a hard almost plastic type material. They are much stiffer than the rubber ones that come with the bar. I went with moog K80815. I left the rears as rubber as I was not able to find a similar type of bushing.
 
If you look up my Regal build.. I used ES bushings and endlinks on the front and bushings on the rear with Moog endlinks in the rear. GMPP bars. Pictures and part numbers should all be in there. If not.. hit my photobucket and under Regal Mods..all the pics are there.
 


I used a GMPP rear bar and front Dorman and it was pretty nice, but I got poly bushings and endlinks this month and it was a MASSIVE difference. I used the same end links and bushings Bill just cited^
 
Hey I just got the 19mm es bushings and the gmpp rear sway bar. The es bushing fit a little loose it seems. Is that normal?

Sent from my LG-H901 using Tapatalk
 
You must log in or register to reply here.
Back
Top