• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Misfiring on Cylinder 5

rell2005

rell2005

New member
After I replaced my Valve cover gaskets today, cylinder 5 began misfiring. There was not misfire last night as it drove fine. I checked and all the plugs and wires were fitted properly and the plug wasn't cracked. I put in new spark plug wires and replaced the plug only to see its still misfiring. My next guess is coil packs? ANY OTHERS IDEAS or SUGGESTIONS???
 


Make sure you didn't muck-up an injector wire. #5 is front farthest to the right.

-----------------2 4 6
FRONT motor
passenger side
-----------------1 3 5

Front Bumper
 
check the plug wire for # 5, it may have been left on a manifold and got burnt up, you can switch coil packs around, and switch the wire, see it the mis follows.
 
scottydoggs said:
check the plug wire for # 5, it may have been left on a manifold and got burnt up, you can switch coil packs around, and switch the wire, see it the mis follows.
Click to expand...

I put new wires and a new plug in....and the wire for sure hasnt touched the headers...but im gonna switch the coilpacks tomorrow to see if it follows
 
You must log in or register to reply here.
Back
Top