• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

MAF Sensor Question?

B

bwoolley

New member
I have a 2000 Pontiac Grand Prix GTP that is running rough and lost gas mileage.
I have put a code reader on it and it said it was no voltage at the MAF sensor. Put another one in the car and it doesn't run any better? Someone had said one time they found a blown fuse, I pulled every fuse in the car and all are fine! I checked to see if I had voltage at the Connector to the MAF sensor and I do?
I could really use some tips on what else I might have going on??
Thanks,
Brian
 


check the wires from the plug to the maf, if you see any cracks in the wires you need a new pig tail.

with the car off, un plug the maf, then start it, if it runs better unplugged then something is wrong with the maf or wires to it.
 
You must log in or register to reply here.
Back
Top