• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Intake questions 01 gt

Rlugo87

Rlugo87

New member
Hi there guys,
So this may seem like a dumb question but I guess I'd rather know them guess haha. So I am slowly modding my 01 GT not trying to make any serious numbers but just have a fun weekend car. I currently have a u bend delete, zzp pcm , autolite 104's, Taylor 8mm wires, zzp 1.9 rockers and hv3 insert the last 2 waiting for my 4th of July vacation to install. I guess onto my question, I have a home made intake and I'm wondering if this setup is doing more harm than good because of the 4in to 3in coupler and 3in intake tubing. Would I be better off getting a zzp 4in intake or making my own 4in intake or is what I have sufficient? The picture is kinda crap sorry I work nights and this is the only chance I had to snap a quick pic.

Sent from my Z958 using Tapatalk
 


373ec6a2312bf1d8def84772be06c762.jpg

Btw I do have another piece of tubing to move the filter farther into the fenderwell or is that not going to be very beneficial? I know most of what I have done is maintenance the rockers and hv3 are the beginning of actual mods. Thank you guys.

Sent from my Z958 using Tapatalk
 
Last edited:
You can make your own 4" intake, but I went from a 3" to 4" and I didn't notice any difference.being a cold air intake or open air intake doesn't really make a difference except for real hot days sitting at a light then the open cone gets pretty hot, but once you start moving it's fine.
I say leave it as is unless your bored lol.
 
I have some 606's I can put in I got for my Bonneville. I guess I was just used to buying 104's because I am used to owning gtp's. Thank you guys.

Sent from my Z958 using Tapatalk
 
You must log in or register to reply here.
Back
Top