• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Illuminating Switches

Reddcurrlz

Reddcurrlz

New member
I have a 2000 GPGT and I'm fixing things little by little to make it nicer and the switches for the windows and locks on the driver side, do not illuminate.

Are there fuses inside the the control panel or light bulbs? or are there fuses someplace else or light bulbs.

Please let me know

Thanks ya'll
 


There's usually a couple of lights in there. Odd that you don't get any lllumination to that. I'd pull the switch and check the wire in taht connector for power with the lights on. Don't have the schematic in front of me, but someone can probably toss the info at you.
 
BillBoost37 said:
There's usually a couple of lights in there. Odd that you don't get any lllumination to that. I'd pull the switch and check the wire in taht connector for power with the lights on. Don't have the schematic in front of me, but someone can probably toss the info at you.
Click to expand...
That would be extremely helpful, as I have read the manual from front to back and cannot find any information about that particular part. Gonna call the dealer and see if they have any suggestions.

That door panel has been taken off and put back on so many times due to those durn window issues, so it's possible something got knocked loose or broken.

If anybody has a schematic, I would be extremely grateful.

TY all
 
You must log in or register to reply here.
Back
Top