• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Ignition Switch & Harness keeps going bad

WhiteLightningGTP

WhiteLightningGTP

New member
Both blinker lights on dash are on, as well as the high beam one. They won't turn off and I have no blinkers and the lights won't turn on by using the dial. Any ideas?



edit: changed thread title. Replaced the ignition switch and harness with a new GM one and it fixed my issue, however, Tuesday it happened again. Blower motor resistor?
 
Last edited:


Re: Blinker Lights on Dash On

it must be your headlight fluid need changing.










i think it may be the steering column harness has gone nuts on ya
 
Re: Blinker Lights on Dash On

being that the fluid loss jokes are out of the way. lol

could be the multi switch aka the stick you move to turn the blinkers on. or the ignition harness.
 
Re: Blinker Lights on Dash On

What does it do if you put the hazards on?
^thats what i was thinkin scottydoggs(multifunction swi)
 


Re: Blinker Lights on Dash On

The flashers don't do anything until I pull the key out. The same thing happened about a month ago, but it clicked off after about two minutes and never came back.
 
Re: Blinker Lights on Dash On

that is bizarre. I remeber something like that happening back when i was a GM mechanic..... i think it was actually the flasher.... but brain farts prevent me from actually remembering LOL. Go to a jy and snatch a flasher module hahha
 


Ever figure out if anything was actually damaged on the old harness? Maybe its further down the line but you jiggled it enough to make it work when you replaced the harness? I would personally guess the turn signal / brights switch.
 
You must log in or register to reply here.
Back
Top