• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Heading to the track

2

2000GTP243

New member
How's it going, first post. Gonna head to the track tonight for the first time in the 2000 gtp.

Mods are intake and speed daddy headers with a 3in catless down pipe

Let's see how she does, tracks at around 4400ft


Sent from my E6810 using Tapatalk
 


Best was a 15.6 @87. With a 2.3 60ft

Track prep was good. It didn't feel like i was spinning at all.

Don't know if it's the high elavation maybe?

What's the stock stall on these cars. I was able to hold mine around 2800 to 3000 rpms.


Sent from my E6810 using Tapatalk
 


At nearly a mile above sea level that plays a huge roll in how quick or slow it is. Do you know what the DA was?

If that was higher, then it would make things worse.

2.3 60 foot hurts too, I'm sure it was spinning some or you were extra gentle for the first 100 feet to not blow the tires off.

I don't know the exact stall number but I could hold my old car just above 2,000rpm.
 
Fivefingerdeathpunch said:
At nearly a mile above sea level that plays a huge roll in how quick or slow it is. Do you know what the DA was?

If that was higher, then it would make things worse.

2.3 60 foot hurts too, I'm sure it was spinning some or you were extra gentle for the first 100 feet to not blow the tires off.

I don't know the exact stall number but I could hold my old car just above 2,000rpm.
Click to expand...
DA was 6411,. As per my 60'. I dunno. It didn't feel like i was spinning but 2.3 was all i could muster.

Sent from my E6810 using Tapatalk
 
time for a pulley drop. you got the pcm tuned yet? that can also help out.

dont feel bad, at fuking sea level i could only get a 2.2 60', but i was also spinning if i nailed it off the line. best run so far was a 14.3 at 97 mph.

i got a new tranny and meth now, so smaller pulley and more timing then the last time. and its getting cooler here :th_thumbsup-wink:. i need to get out there already.
 
Scottydoggs said:
time for a pulley drop. you got the pcm tuned yet? that can also help out.

dont feel bad, at fuking sea level i could only get a 2.2 60', but i was also spinning if i nailed it off the line. best run so far was a 14.3 at 97 mph.

i got a new tranny and meth now, so smaller pulley and more timing then the last time. and its getting cooler here :th_thumbsup-wink:. i need to get out there already.
Click to expand...
No tune yet but ordered a 3.5 pulley. I get zero kr now so let's see how it is with a pulley.

Tune is next on the list


Sent from my E6810 using Tapatalk
 
You must log in or register to reply here.
Back
Top