• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Have 2006 L26 Top Swap Questions

M

mram10

New member
Hey guys,
Bought a 7k mile L26. We just put some redone L67 heads(new ARP bolts) with LIM and Gen 5. We also used the L26 exhaust on the L67 heads. We plan on using the north* TB and making it throttle cable vs drive by wire. I also want to change the injectors. We are thinking of using the ford lightning ones. What advice do you guys have? Am I missing anything? Thanks.
 


How are you going to make it drive by wire? You could get 60# injectors and go E85 while youre buying injectors. Also you need headers, stock manifolds wont cut it on a top swap motor.
 
Better run a 4.2 pulley with stock manifolds.

Needs headers.

If you change the TB and injectors you need a new custom tune, which I assume you know.

N* is boring, stick with stock untill you can outflow it.
 
mram10 said:
We plan on using the north* TB and making it throttle cable vs drive by wire.
Click to expand...

134016673942.png
 
I was saying we are avoiding doing the drive by wire stuff, due to the extra wiring. If there is an easy way to do it, let me know. It is going in a fiero. Thanks for the advice thus far guys.
 


mram10 said:
I was saying we are avoiding doing the drive by wire stuff, due to the extra wiring. If there is an easy way to do it, let me know. It is going in a fiero. Thanks for the advice thus far guys.
Click to expand...

What year northstar throttle body were you planning on using that was drive by wire, and would need converted to cable driven?
 
You must log in or register to reply here.
Back
Top