Classy Pontiac
New member
Ok I have a GXP front bumper conversion on my car. Everything works as far as front end lights, except the fog lights. This is what I am doing/trying to do:
Im doing a 04+ retrofit with the H1 projectors and Hids (55w)
I am keeping the factory bulb in the turn signals/DRLs (or whatever you want to call them).
And for the fogs (keep in mind I have a GXP front bumper setup) I plan on running Hids (35w).
So I quick drew up these pictures to give you guys somewhat of an idea what I need help with.
[/IMG]
[/IMG]
[/IMG]
So this is what I want to happen:
I want the 35w Hid foglights to be on with the LED halos and the blinkers/DRLs. But I dont want the halos and fogs to blink when the blinker is applied. I want these to be on most of the time if not all of the time.
I want the 55w Hid Dims to come on when the light sensor in the car thinks its dark enough outside.
I need some serious help, because I am completely lost with how the front bumper lights are all wired up. The last diagram I drew is how I think its/will be wired up but most likely I am wrong.
Before you post have you read the write-ups...yes I have read the write ups but i am doing something alot more complicated (i think).
Any help is GREATLY needed. Thanks
Im doing a 04+ retrofit with the H1 projectors and Hids (55w)
I am keeping the factory bulb in the turn signals/DRLs (or whatever you want to call them).
And for the fogs (keep in mind I have a GXP front bumper setup) I plan on running Hids (35w).
So I quick drew up these pictures to give you guys somewhat of an idea what I need help with.
So this is what I want to happen:
I want the 35w Hid foglights to be on with the LED halos and the blinkers/DRLs. But I dont want the halos and fogs to blink when the blinker is applied. I want these to be on most of the time if not all of the time.
I want the 55w Hid Dims to come on when the light sensor in the car thinks its dark enough outside.
I need some serious help, because I am completely lost with how the front bumper lights are all wired up. The last diagram I drew is how I think its/will be wired up but most likely I am wrong.
Before you post have you read the write-ups...yes I have read the write ups but i am doing something alot more complicated (i think).
Any help is GREATLY needed. Thanks