• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Getting ready to swap the tranny chain...

Tengis

Tengis

New member
... I think Im gonna do it myself. Ive also got a ZZP pump shaft.

For someone that has never done anything inside the tranny except change a solenoid, would it be recommended to not do this myself? I dont want to plop down $$$$ to have it put in locally and them do a hackjob and I dont have a place or equipment to pull the tranny myself.
 
Last edited:


I have a writeup somewhere on here, probably in the tech articles section and it shows how to install a chain set. You really need to have a tech manual on hand to be able to follow and check things. It is a pretty big job to do and very involving inside the trans, make sure you have all of the gaskets you will need before you are stuck with a no moving car!
 
You must log in or register to reply here.
Back
Top