• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Gen V Top Swap Felpro Gasket Set



looks good but id order head bolts too. not sure if others have reused them i wouldnt anyways. maybe some exhaust manifold bolts too exhaust bolts are a pain to reuse.
 
ImNowTylerTibbets said:
looks good but id order head bolts too. not sure if others have reused them i wouldnt anyways. maybe some exhaust manifold bolts too exhaust bolts are a pain to reuse.
Click to expand...

Definitely getting new head bolts, didn't see a full gasket kit that included them, though. Already have newer exhaust bolts from SD headers.
 
if you are doing a gen 5 swap, you are going to need a gen 5 supercharger gasket, not a gen 3 like that one is.
 
you can do better then that felpro listing. its got more un needed stuff, and missing a lot of what you do need.

look up a lower convertion kit, buy head gaskets and lim gaskets a tb and sc gasket and your done. gen 5 you can rtv it on if you like, the metal gasket is like 40 bucks.

full gaskets, head bolts with oil and coolant ran me right around 200.
 
SgtMarshal said:
if you are doing a gen 5 swap, you are going to need a gen 5 supercharger gasket, not a gen 3 like that one is.
Click to expand...

uuuhhh.... check the listing again? Clearly shows a metal S/C gasket (unless the photo is incorrect), afaik the gen 3 never had a factory metal gasket replacement, only paper.
 


Scottydoggs said:
you can do better then that felpro listing. its got more un needed stuff, and missing a lot of what you do need.

look up a lower convertion kit, buy head gaskets and lim gaskets a tb and sc gasket and your done. gen 5 you can rtv it on if you like, the metal gasket is like 40 bucks.

full gaskets, head bolts with oil and coolant ran me right around 200.
Click to expand...

Okay, I'll look into piecing together. The Fel-Pro head gaskets seem a lot more common around the auto parts stores, but should I spring for OEM head gasket? I've heard rumors about rumors about sealing issues with the Fel-Pro ones, but no evidence.

I've always had good luck with the Fel-pro metal LIM gaskets, though.
 
i got everything from advance auto on line, all but the lim gaskets, i got the magnum kit from ra for 40 shipped. that lim kit comes with more stuff then any other lim kit. they work just fine. look just like the acdelco ones.
 
Impala131 said:
Okay, I'll look into piecing together. The Fel-Pro head gaskets seem a lot more common around the auto parts stores, but should I spring for OEM head gasket? I've heard rumors about rumors about sealing issues with the Fel-Pro ones, but no evidence.

I've always had good luck with the Fel-pro metal LIM gaskets, though.
Click to expand...

my fel-pro head gaskets have worked fine with my xp cam, ported heads and until a few months ago a full size intercooler. probably made about 350 hp. I did use head studs, but that shouldn't make much difference for the sealing of the head gaskets.
 
You must log in or register to reply here.
Back
Top