Fuel Rail nonsense

[04lss]

I ordered the 2nd generation fuel logs from ZZP. The ones that you re-use the regulator from your fuel rails with. I cannot find any instructions on how to mount these things.

Here is a link to a library of photos i took of my best effort at installing them: Update your browser to use Google Drive - Google Drive Help


The regulator housing came on a bracket seperate from the rails, but since there are only 2 houses, as far as i can tell it has to connect directly to one of the rails.
The problem right now is that the Input fiting is at a bad angle for the fuel line, i tried moving the line to connect and it almost crimped it.
I cant figure out how this is supposed to go.

Worst case, i guess Ill email ZZP on monday, but they havent been very helpful yet. Last time i emailed to ask about something, i got "yeah you should have bought our intake"


Any help is appreciated.

 

[SgtMarshal]

their intake is stupid. literally makes no difference. sorry i'm not any help with your fuel rails.

 

[04lss]

their intake is stupid. literally makes no difference. sorry i'm not any help with your fuel rails.

By intake i ment the fuel intake, like the line that feeds fuel into the rails.

 

[04lss]

By intake i ment the fuel intake, like the line that feeds fuel into the rails.

Ooops, ignore me, i see what you ment.

They were talking about their ported lower manifold.

 

[04lss]

Should I do a how to on them once zzp (hopefully) tells me how to install them?