Fixing Exposed ICM Wires

[CHI2000GTP]

During one of my stare sessions, where I just stare at the engine and poke around, I noticed the wiring on the ICM is looking shody. Lots of cracks and at least 3 areas where wire is clearly visible. How would I go about repairing this?

I'm thinking of finding a junk-yard harness, cutting the wires, and taking that home. Cut wires on one end, and the ICM connector on the other. I would then cut those wires off of my harness. I would cut that bundle of wires closer to where the motor mount (dog bone) bracket is and soldering in the newer wires into my harness... Any thought's?

 

[Silver2kgtp]

Do not cut and solder any ICM wires. The ICM harness should just be replaced. Don't take a chance.

Rockauto has it for $81 before shipping.

https://www.amazon.com/Dorman-645-6...qid=1493069588&sr=1-1&keywords=Dorman+645-688

 

[CHI2000GTP]

Ok. Cool. Thanks for the tip, Silver2k! Didn't know that buying just that piece of the harness was even an option. Sounds good to me. Looks like I will be buying that soon.